Search
English
Gimatic
Sort by
Display
per page
Self-centring angular electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.93 Hz at 30°C, IP54, with bushings - MPBM1640
MPBM1640
Self-centring angular electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.93 Hz at 30°C, IP54, with bushings
Self-centring angular electric gripper, 24Vdc, 11 W, PNP, M8 3-pin, peak 1.2A, servo DC motor with built-in controller, Max. 0.85 Hz at 30°C, IP54, with bushings - MPBM2540
MPBM2540
Self-centring angular electric gripper, 24Vdc, 11 W, PNP, M8 3-pin, peak 1.2A, servo DC motor with built-in controller, Max. 0.85 Hz at 30°C, IP54, with bushings
Self-centring angular electric gripper, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.81 Hz at 30°C, IP54, with bushings - MPBM3240
MPBM3240
Self-centring angular electric gripper, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.81 Hz at 30°C, IP54, with bushings
NEW
Self centering electric gripper with embedded drive - MPCF
Self centering electric gripper with embedded drive
NEW
Self centering electric gripper with embedded drive, 24Vdc, 30W, CANopen/RS485 interface, M12 8 pins, 4.8A peak, brushless motor, absolute position feedback, IP40, with centering sleeves - MPCF3270
MPCF3270
Self centering electric gripper with embedded drive, 24Vdc, 30W, CANopen/RS485 interface, M12 8 pins, 4.8A peak, brushless motor, absolute position feedback, IP40, with centering sleeves
NEW
Finger kit to adapt the gripper MPLF3270 to the KIT-GMPLMP3240 - MPCF-KIT-01
MPCF-KIT-01
Finger kit to adapt the gripper MPLF3270 to the KIT-GMPLMP3240
NEW
Wiring KIT to power supply and communicate via CANbus with MPCF grippers. This KIT includes a M12-8pins cable equipped with a pre-mounted D-SUB 9 pins female connector and a USB/CAN converter by Peak - MPCF-KIT-02
MPCF-KIT-02
Wiring KIT to power supply and communicate via CANbus with MPCF grippers. This KIT includes a M12-8pins cable equipped with a pre-mounted D-SUB 9 pins female connector and a USB/CAN converter by Peak
2-jaw self-centering servo-electric parallel gripper with long stroke - MPLF
2-jaw self-centering servo-electric parallel gripper with long stroke
Self-centring parallel electric gripper, 24Vdc, 5W, M12 12-pin, direct control of brushless motor with HALL sensors and ABZ encoder,peak 1A,totale stroke 30mm,IP40,with centering sleeves,no drive - MPLF1630
MPLF1630
Self-centring parallel electric gripper, 24Vdc, 5W, M12 12-pin, direct control of brushless motor with HALL sensors and ABZ encoder,peak 1A,totale stroke 30mm,IP40,with centering sleeves,no drive
Self-centring parallel electric gripper, 24Vdc, 8W, M12 12-pin, direct control of brushless motor with HALL sensors and ABZ encoder,peak 1.5A,totale stroke 50mm,IP40,with centering sleeves,no drive - MPLF2550
MPLF2550
Self-centring parallel electric gripper, 24Vdc, 8W, M12 12-pin, direct control of brushless motor with HALL sensors and ABZ encoder,peak 1.5A,totale stroke 50mm,IP40,with centering sleeves,no drive
Self-centring electric parallel servo gripper,24Vdc,30 W,M12 12-pin,direct motor control with HALL sensors and ABZ incremental encoder,peak 4.8A,total stroke 70mm,IP40,with bushings,no drive - MPLF3270
MPLF3270
Self-centring electric parallel servo gripper,24Vdc,30 W,M12 12-pin,direct motor control with HALL sensors and ABZ incremental encoder,peak 4.8A,total stroke 70mm,IP40,with bushings,no drive
NEW
Drive and connector KITs for MPLF servo grippers - MPLF-KIT
Drive and connector KITs for MPLF servo grippers
NEW
Cables, connectors and drive KIT for MPLF: USB cable, cable M12 for motor phases and encoder, cable for I/O, CANopen cable,3 leads cable 2.5 m long for power supply. Drive DRV24MAXIN15IP045 included - MPLF-KIT-01
MPLF-KIT-01
Cables, connectors and drive KIT for MPLF: USB cable, cable M12 for motor phases and encoder, cable for I/O, CANopen cable,3 leads cable 2.5 m long for power supply. Drive DRV24MAXIN15IP045 included
NEW
Finger kit to adapt the MPLF32710 gripper to the KIT-GMPLM3240 - MPLF-KIT-02
MPLF-KIT-02
Finger kit to adapt the MPLF32710 gripper to the KIT-GMPLM3240
NEW
Kit of cable and connectors to interface MPLF grippers to Maxon drive: USB cable, M12 cable for phase and encoder, cable for I/O, cable and connector for CANopen and 2.5 m long cable for power supply - MPLF-KIT-03
MPLF-KIT-03
Kit of cable and connectors to interface MPLF grippers to Maxon drive: USB cable, M12 cable for phase and encoder, cable for I/O, cable and connector for CANopen and 2.5 m long cable for power supply
Recently viewed products
TRADE ASSOCIATIONS
