Gimatic

Red cross beam laser module - MLS

Red cross beam laser module

NEW

Pneumatic slides for EOATs - ZL

Pneumatic slides for EOATs

Mini compensator - MCD

Mini compensator

Angular self-centring pneumatic gripper, 4-8bar, G1/8, with signal detecting device for pneumatic sensor - DD20-16MV

DD20-16MV

Angular self-centring pneumatic gripper, 4-8bar, G1/8, with signal detecting device for pneumatic sensor

Angular self-centring pneumatic gripper, 3.5-8bar, G1/8, with seat for pneumatic sensor - DD20-16M2

DD20-16M2

Angular self-centring pneumatic gripper, 3.5-8bar, G1/8, with seat for pneumatic sensor

Sensor mounting clamp with tie-rod fastening for cylinders of diameter 52.4 mm - XF-52

XF-52

Sensor mounting clamp with tie-rod fastening for cylinders of diameter 52.4 mm

Sensor mounting clamp with tie-rod fastening for cylinders of diameter 30 mm - XF-30

XF-30

Sensor mounting clamp with tie-rod fastening for cylinders of diameter 30 mm

Sensor mounting bracket with tie-rod fastening for cylinders with extruded liner, diameter 80 mm - ST-52

ST-52

Sensor mounting bracket with tie-rod fastening for cylinders with extruded liner, diameter 80 mm

Analog sensor for C-slot, series SS, analog output 0/10 V, sensitivity 5/35 G, 24 Vdc, 0.2 A, flat PVC cable 3x0.14mm², length 0.3 metres with M8 connector with lock nut - SS3V203-G

SS3V203-G

Analog sensor for C-slot, series SS, analog output 0/10 V, sensitivity 5/35 G, 24 Vdc, 0.2 A, flat PVC cable 3x0.14mm², length 0.3 metres with M8 connector with lock nut

Magnetic sensor with fastening by tie-rod, series SM with sensitive probe remotely controlled at 0.2 m from body, magnetoresistive NPN N.O., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25 mm², 2.5 metres - SM4MR225-G

SM4MR225-G

Magnetic sensor with fastening by tie-rod, series SM with sensitive probe remotely controlled at 0.2 m from body, magnetoresistive NPN N.O., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25 mm², 2.5 metres

Magnetic sensor with fastening by tie-rod, series SM, exchange-type REED, 3 wires, 3/110 Vac/dc, 1.5 A, round PVC cable 3x0.25 mm², 2.5 metres - SM4S425-G

SM4S425-G

Magnetic sensor with fastening by tie-rod, series SM, exchange-type REED, 3 wires, 3/110 Vac/dc, 1.5 A, round PVC cable 3x0.25 mm², 2.5 metres

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive PNP N.C., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25 mm², 2.5 metres - SM4P225-G

SM4P225-G

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive PNP N.C., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25 mm², 2.5 metres

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive NPN N.C., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25mm², 2.5 metres - SM4L225-G

SM4L225-G

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive NPN N.C., 6/30 Vdc, 0.25 A, round PVC cable 3x0.25mm², 2.5 metres

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive PNP N.C., 6/30 Vdc, 0.25 A, M8 male snap connector, 3-pin - SM3P2-G

SM3P2-G

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive PNP N.C., 6/30 Vdc, 0.25 A, M8 male snap connector, 3-pin

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive NPN N.C., 6/30 Vdc, 0.25 A, M8 male snap connector, 3-pin - SM3L2-G

SM3L2-G

Magnetic sensor with fastening by tie-rod, series SM, magnetoresistive NPN N.C., 6/30 Vdc, 0.25 A, M8 male snap connector, 3-pin

Magnetic sensor with fastening by tie-rod, series SM, REED N.C. 2 wires with VDR, no LED, 0/110 Vac/dc, 1 A, M8 male snap connector, 2-pin - SM2G4-G

SM2G4-G

Magnetic sensor with fastening by tie-rod, series SM, REED N.C. 2 wires with VDR, no LED, 0/110 Vac/dc, 1 A, M8 male snap connector, 2-pin