Gimatic
Sort by
Display
per page
2322040
VG.CF77 suction cup, HNBR, 60 Shore, G1/4″ male
2322041
VG.CF77 suction cup, HNBR, 60 Shore, G3/8″ male
NEW
MFI-A507
Elbow arm for vacuum cup, diameter 20 mm, long 200mm, G3/8, with screws
AF27F33M
Threaded nipple, M27 female inside, M33 male outside, with 2 nuts
9900014
Non-rotative suspension with angular coupling and M20x1.5 threaded body, stroke 25 mm, G1/4, with 2 nuts
VSC1620
Non-rotative telescopic suspension and M16x1 threaded body, stroke 20 mm, M5 thread, 2 nuts, for vacuum
3300014
EJ-MEDIUM-HF-2 ejector with holder, integrated silencer and non-return valve
3300010
EJ-MEDIUM-LP-2 ejector with holder, integrated silencer and non-return valve
RG.RO-1376-AS2
Adjustable push-on fitting, tube diameter 4/2.7 mm, M3x0.5 (10 pieces)
NEW
9900063
M20x1.5 suspension for heavy loads, G3/8" female, max stroke 50mm
MFI-A360
Interface for gripper ZJ-3235, with screws
3030119
Vacuum sensor, VACSW series, single output PNP NO, preset -30kPa,12-24 Vdc, 0.2A, round cable PUR 0.08mm2, cable 300 mm with male M8x1 3 pins
3030120
Vacuum sensor, VACSW series, single output PNP NO, preset -50kPa,12-24 Vdc, 0.2A, round cable PUR 0.08mm2, cable 300 mm with male M8x1 3 pins
3030121
Vacuum sensor, VACSW series, single output PNP NO, preset -70kPa,12-24 Vdc, 0.2A, round cable PUR 0.08mm2, cable 300 mm with male M8x1 3 pins
3030122
Pre-set vacuum switch NPN -30 kPa with digital output, cable L= 30 cm with M8x1 3-pin male connector
3030123
Pre-set vacuum switch NPN -50 kPa with digital output, cable L= 30 cm with M8x1 3-pin male connector
Categories
Visualizza tutto
Nascondi