Menu
Search
English
English
measure
Metric
;
Search Close
Select your categories
    Menu Close

    Gimatic

    Sort by
    Display per page
    358380202
    NEW

    120x200 mm vacuum gripping system, integrated vacuum generator, G3/8" holes for Ø35 mm suction cup fittings, with solenoid valves - 358380202

    358380202
    120x200 mm vacuum gripping system, integrated vacuum generator, G3/8" holes for Ø35 mm suction cup fittings, with solenoid valves
    MPLF-KIT-01
    NEW

    Cables, connectors and drive KIT for MPLF: USB cable, cable M12 for motor phases and encoder, cable for I/O, CANopen cable,3 leads cable 2.5 m long for power supply. Drive DRV24MAXIN15IP045 included - MPLF-KIT-01

    MPLF-KIT-01
    Cables, connectors and drive KIT for MPLF: USB cable, cable M12 for motor phases and encoder, cable for I/O, CANopen cable,3 leads cable 2.5 m long for power supply. Drive DRV24MAXIN15IP045 included
    370245014
    NEW

    Vacuum gripping system for bags, 245x125x90 mm, with integrated two-stage vacuum generator and 30mm thick EPDM foam - 370245014

    370245014
    Vacuum gripping system for bags, 245x125x90 mm, with integrated two-stage vacuum generator and 30mm thick EPDM foam
    370245004
    NEW

    Vacuum gripping system for bags, 245x125x90 mm, with integrated two-stage vacuum generator and 30mm thick natural rubber foam - 370245004

    370245004
    Vacuum gripping system for bags, 245x125x90 mm, with integrated two-stage vacuum generator and 30mm thick natural rubber foam
    KIT-UR-QC

    kit for Universal Robot (UR), QCY90 manual quick changer, pre-wired PMAQC and PMBQC connectors, 2 interface plates, G1/8 air fittings, fixing screws and compressed air hose - KIT-UR-QC

    KIT-UR-QC
    kit for Universal Robot (UR), QCY90 manual quick changer, pre-wired PMAQC and PMBQC connectors, 2 interface plates, G1/8 air fittings, fixing screws and compressed air hose
    3330147
    NEW

    EJ-CEN-LARGEX5-HF vacuum pump with silencer and analogue vacuum gauge, G1" vacuum port - 3330147

    3330147
    EJ-CEN-LARGEX5-HF vacuum pump with silencer and analogue vacuum gauge, G1" vacuum port
    3330135
    NEW

    EJ-CEN-LARGEX5-HV vacuum pump with silencer and analogue vacuum gauge, G1" vacuum port - 3330135

    3330135
    EJ-CEN-LARGEX5-HV vacuum pump with silencer and analogue vacuum gauge, G1" vacuum port
    SXT5012-NC

    Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 4/8 bar, G1/8 - SXT5012-NC

    SXT5012-NC
    Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 4/8 bar, G1/8
    PQ6063

    Parallel self-centring pneumatic gripper, 3.5/8 bar, M5, with sleeves - PQ6063

    PQ6063
    Parallel self-centring pneumatic gripper, 3.5/8 bar, M5, with sleeves
    MPLM1630

    Self-centring parallel electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.51 Hz at 30°C, IP54, with bushings - MPLM1630

    MPLM1630
    Self-centring parallel electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.51 Hz at 30°C, IP54, with bushings
    MPXM3220

    Self-centring parallel electric gripper, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.85 Hz at 30°C, IP54, with bushings - MPXM3220

    MPXM3220
    Self-centring parallel electric gripper, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.85 Hz at 30°C, IP54, with bushings
    MRE32180

    Electric rotary actuator, 180°/90°, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.62 Hz at 30°C, IP54, with bushings - MRE32180

    MRE32180
    Electric rotary actuator, 180°/90°, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.62 Hz at 30°C, IP54, with bushings
    MPLM1630IOL
    NEW

    Self-centring parallel electric gripper, 24Vdc, 6 W, IO-Link, 4-pin M8, peak 0.9A, servo DC motor with built-in controller, Max. 0.51 Hz at 30°C, IP54, with bushings - MPLM1630IOL

    MPLM1630IOL
    Self-centring parallel electric gripper, 24Vdc, 6 W, IO-Link, 4-pin M8, peak 0.9A, servo DC motor with built-in controller, Max. 0.51 Hz at 30°C, IP54, with bushings
    MPXM3220IOL
    NEW

    Self-centring parallel electric gripper, 24Vdc, 23 W, PNP, M8 4-pin, peak 3.8A, servo DC motor with built-in controller, serial interface, Max. 0.85 Hz at 30°C, IP54, with bushings - MPXM3220IOL

    MPXM3220IOL
    Self-centring parallel electric gripper, 24Vdc, 23 W, PNP, M8 4-pin, peak 3.8A, servo DC motor with built-in controller, serial interface, Max. 0.85 Hz at 30°C, IP54, with bushings
    3331148
    NEW

    EJ-CEN-LARGEX6-HF vacuum pump, G1" vacuum port, G2" exhaust - 3331148

    3331148
    EJ-CEN-LARGEX6-HF vacuum pump, G1" vacuum port, G2" exhaust
    MG-0103-NC

    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/8 - MG-0103-NC

    MG-0103-NC
    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/8
    MG-0103-NO

    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/8 - MG-0103-NO

    MG-0103-NO
    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/8
    GM-0103-NC

    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/8 - GM-0103-NC

    GM-0103-NC
    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/8
    GM-0103-NO

    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/8 - GM-0103-NO

    GM-0103-NO
    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/8
    3331136
    NEW

    EJ-CEN-LARGEX6-HV vacuum pump, G1" vacuum port, G2" exhaust - 3331136

    3331136
    EJ-CEN-LARGEX6-HV vacuum pump, G1" vacuum port, G2" exhaust
    370245003
    NEW

    Vacuum gripping system for bags, 245x125x70 mm, with integrated two-stage vacuum generator and 30mm thick natural rubber foam - 370245003

    370245003
    Vacuum gripping system for bags, 245x125x70 mm, with integrated two-stage vacuum generator and 30mm thick natural rubber foam
    370245013
    NEW

    Vacuum gripping system for bags, 245x125x70 mm, with integrated two-stage vacuum generator and 30mm thick EPDM foam - 370245013

    370245013
    Vacuum gripping system for bags, 245x125x70 mm, with integrated two-stage vacuum generator and 30mm thick EPDM foam
    DH5526G-NC
    NEW

    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves - DH5526G-NC

    DH5526G-NC
    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
    DH5526G-NO
    NEW

    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves - DH5526G-NO

    DH5526G-NO
    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
    DH5512G-NC
    NEW

    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves - DH5512G-NC

    DH5512G-NC
    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
    DH5512G-NO
    NEW

    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves - DH5512G-NO

    DH5512G-NO
    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
    PE-4540-NC

    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/4 - PE-4540-NC

    PE-4540-NC
    Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, G1/4
    PE-4540-NO

    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/4 - PE-4540-NO

    PE-4540-NO
    Parallel self-centring pneumatic gripper, normally open, 4/8 bar, G1/4
    SX5060

    Parallel self-centring pneumatic gripper, 2/8 bar, G1/8 - SX5060

    SX5060
    Parallel self-centring pneumatic gripper, 2/8 bar, G1/8
    PE-25100

    Parallel self-centring pneumatic gripper, 2/8 bar, G1/8 - PE-25100

    PE-25100
    Parallel self-centring pneumatic gripper, 2/8 bar, G1/8
    ITSC-454

    Pneumatic rotary table, clockwise, 4x90°, 2.5/8 bar, G1/4 - ITSC-454

    ITSC-454
    Pneumatic rotary table, clockwise, 4x90°, 2.5/8 bar, G1/4
    ITSC-454A

    Pneumatic rotary table, counterclockwise, 4x90°, 2.5/8 bar, G1/4 - ITSC-454A

    ITSC-454A
    Pneumatic rotary table, counterclockwise, 4x90°, 2.5/8 bar, G1/4
    Categories
    Visualizza tutto Nascondi
    Recently viewed products
    Information
    My account
    Customer service
    TRADE ASSOCIATIONS
    AMAPLAST AIDAM VDMA
    Gimatic S.r.l.  -  VAT: IT02969010178  -  Via Enzo Ferrari n. 2/4, 25030 Roncadelle (Bs)
    Powered by nopCommerce
    Developed by Weblink
    Copyright © 2025 Gimatic S.r.l. store. All rights reserved.