Gimatic

Self-centring parallel electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 1 Hz at 30C, IP54, with bushings - MPPM1606

MPPM1606

Self-centring parallel electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 1 Hz at 30C, IP54, with bushings

Self-centring angular electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.93 Hz at 30°C, IP54, with bushings - MPBM1640

MPBM1640

Self-centring angular electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.93 Hz at 30°C, IP54, with bushings

Gripping solution for cleanrooms, silicone covers, mechanical flanges, set of fixing screws, hygienic screws and washers for the mounting of fingers, internal jaws - KIT-GMP-G

KIT-GMP-G

Gripping solution for cleanrooms, silicone covers, mechanical flanges, set of fixing screws, hygienic screws and washers for the mounting of fingers, internal jaws

NEW

Vacuum gripping systems for bags, 245x125x90 mm, with 30 mm thick natural rubber foam, vacuum fitting G1" - 370245002

370245002

Vacuum gripping systems for bags, 245x125x90 mm, with 30 mm thick natural rubber foam, vacuum fitting G1"

NEW

Vacuum gripping systems for bags, 245x125x90 mm, with 30 mm thick EPDM foam, vacuum fitting G1" - 370245012

370245012

Vacuum gripping systems for bags, 245x125x90 mm, with 30 mm thick EPDM foam, vacuum fitting G1"

Pneumatic tilt unit for EOAT, 90-degree rotation, adjustable stroke end stopper, safety lock, optional magnetic sensor, 2/8 bar, G1/8 - RBT63

RBT63

Pneumatic tilt unit for EOAT, 90-degree rotation, adjustable stroke end stopper, safety lock, optional magnetic sensor, 2/8 bar, G1/8

Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 3.5/8 bar, M3/M5 - TH4506-NC

TH4506-NC

Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 3.5/8 bar, M3/M5

Parallel self-centring pneumatic gripper, 3 jaws, normally open, 3.5/8 bar, M3/M5 - TH4506-NO

TH4506-NO

Parallel self-centring pneumatic gripper, 3 jaws, normally open, 3.5/8 bar, M3/M5

Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 3.5/8 bar, M3/M5 - TH4503-NC

TH4503-NC

Parallel self-centring pneumatic gripper, 3 jaws, normally closed, 3.5/8 bar, M3/M5

Parallel self-centring pneumatic gripper, 3 jaws, normally open, 3.5/8 bar, M3/M5 - TH4503-NO

TH4503-NO

Parallel self-centring pneumatic gripper, 3 jaws, normally open, 3.5/8 bar, M3/M5

NEW

Vacuum gripping systems with foam, 60x200 mm, fine pitch with 0.6 mm calibrated holes - 360060202

360060202

Vacuum gripping systems with foam, 60x200 mm, fine pitch with 0.6 mm calibrated holes

NEW

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves - DH4420G

DH4420G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves

NEW

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves - DH3508G-NC

DH3508G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves

NEW

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves - DH3508G-NO

DH3508G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves

NEW

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves - DH3516G-NC

DH3516G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves

NEW

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves - DH3516G-NO

DH3516G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves

NEW

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves - DH4410G

DH4410G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves

NEW

Vacuum gripping systems for bags, 245x125x70 mm, with 30 mm thick EPDM foam, vacuum fitting G1" - 370245011

370245011

Vacuum gripping systems for bags, 245x125x70 mm, with 30 mm thick EPDM foam, vacuum fitting G1"

NEW

60x200 mm vacuum gripping system, integrated vacuum generator, G1/4" holes for Ø22 to Ø35 mm suction cup fittings - 360350202

360350202

60x200 mm vacuum gripping system, integrated vacuum generator, G1/4" holes for Ø22 to Ø35 mm suction cup fittings

Parallel self-centring pneumatic gripper, 2/8 bar, G1/8 - SX4040

SX4040

Parallel self-centring pneumatic gripper, 2/8 bar, G1/8

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/G1/8 - MGX6030-NC

MGX6030-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/G1/8